Sea-level pressure: what it is and how it's calculated

By Marko Visic, BSc Physics. Reviewed November 17, 2026.

The weather report gives one pressure. An unadjusted barometer in the mountains reads several inches lower, and the airport down the road reports a third number for pilots. All three can be right at the same moment.

They describe the same air, adjusted in different ways. Mix them up and an ordinary day in Denver, where the air presses with about 24.6 inches of mercury, looks lower than the deepest typhoon on record, whose eye measured 25.69 inches at sea level.

Below: what sea-level pressure is and why weather maps use it, how it differs from station pressure and the altimeter setting, how it's calculated, a converter, Denver airport's three numbers right now, and why they disagree at high stations.

Sea-level pressure is the air pressure at a weather station adjusted to what it would be at sea level, so places at different heights can be compared on one map. The National Weather Service computes it from the station's actual pressure and its average temperature over the past 12 hours. The standard value is 29.92 inHg (1013.25 hPa).

Sea levelStation pressure: the actual pressure hereAltimeter settingadds a standard-atmosphere columnSea-level pressureadds a column at the past 12 hours' temperatureStation pressureSea levelAltimetersettingSea-levelpressure
  1. Station pressure: the actual pressure at the station.
  2. Altimeter setting: adds an imaginary standard-atmosphere column down to sea level.
  3. Sea-level pressure: adds a column at the past 12 hours' temperature.
Station pressure and the two ways it is reduced to sea level.
On this page

Why weather reports use sea-level pressure

Air pressure drops quickly with height: about 1 inch of mercury for every 1,000 feet near sea level, according to the National Weather Service. A map of raw readings would mostly show how high each station sits, so weather services convert every reading to one common level. "The common denominator we use is the sea-level elevation," as NOAA's JetStream puts it.

Forecast models work the same way. The MET Norway forecast behind this site's 10-day graphs predicts air pressure at sea level.

Station pressure, altimeter setting and sea-level pressure

Three numbers describe the same air at an airport. The National Weather Service defines them like this:

Three pressures at one weather station (National Weather Service definitions)
Number What it is Where you see it
Station pressure The actual pressure at the station's elevation An unadjusted barometer
Altimeter setting Station pressure reduced to sea level with a standard atmosphere Aircraft altimeters; US airport reports, in inHg
Sea-level pressure Station pressure reduced to sea level with the station's actual temperatures Weather maps and forecasts

Mean sea-level pressure is the same value as sea-level pressure; the National Weather Service uses the longer name. The altimeter setting "is not the true barometric pressure at a station", the NWS stresses. It's the value that makes an altimeter on the ground read the height of the airport.

Near sea level the three numbers are almost the same. They split apart as stations get higher.

How sea-level pressure is calculated

To reduce a reading to sea level, weather services imagine a column of air reaching from the station down to sea level and work out the pressure at its base. The answer depends on the temperature assumed for that imaginary air.

  • For sea-level pressure, US practice uses the station's average temperature over the past 12 hours. High stations get an extra plateau correction meant to limit seasonal swings, according to a technical paper from the National Weather Service office in Denver.
  • For the altimeter setting, the temperature comes from a standard atmosphere: 15 °C (59 °F) at sea level, cooling by 6.5 °C per kilometer (about 3.6 °F per 1,000 feet), as the American Meteorological Society's glossary defines it.

The altimeter setting has a published formula from the National Weather Service, with P the station pressure in hPa and h the station's elevation in meters:

Altimeter setting = (P − 0.3) × [1 + k × h ÷ (P − 0.3)0.190284]1 ÷ 0.190284where k = 1013.250.190284 × 0.0065 ÷ 288

Official sea-level pressure also needs the 12-hour temperature record and the plateau correction, so the converter below gives the altimeter setting: sea-level pressure in a standard atmosphere. The methodology page lists this formula with the others we use. The pressure altitude calculator runs it the other way, from an airport's altimeter setting back to station pressure and on to pressure altitude.

Sea-level pressure converter

Worked examples with the National Weather Service formula
Station elevation Station pressure Altimeter setting
1,000 ft (305 m) 29.00 inHg (982.1 hPa) 30.06 inHg (1018.0 hPa)
5,000 ft (1,524 m) 25.00 inHg (846.6 hPa) 30.03 inHg (1017.1 hPa)
5,280 ft (1,609 m) 24.71 inHg (836.8 hPa) 30.00 inHg (1015.9 hPa)

Denver airport's three numbers right now

Denver International Airport right now

Measured at , at an elevation of 5,433 ft (1,656 m).

Sea-level pressure
29.83 inHg (1010.0 hPa)From the airport's report, using its temperatures over the past 12 hours
Altimeter setting
29.88 inHg (1011.9 hPa)From the airport's report, using a standard atmosphere
Station pressure
24.47 inHg (828.5 hPa)Calculated from the altimeter setting with the NWS formula: the actual pressure at the airport

Sea-level pressure is 0.05 inHg (1.9 hPa) lower than the altimeter setting right now. The airport's temperature averaged 38 °F (3 °C) over the past 12 hours; the standard atmosphere assumes 40 °F (4 °C) at this height.

See Denver's full reading

NOAA Aviation Weather Center METAR report for KDEN. Station pressure calculated with the National Weather Service altimeter-setting formula.

Why the numbers disagree at high stations

At a high station the imaginary column is thousands of feet tall, so the temperature assumed for it moves the result a lot. The National Weather Service office in Boulder warns that "mean sea level pressure should be used with caution at high elevations", because temperature can have a profound effect on the reduced value.

The Denver office's paper gives the direction: "low temperatures lead to artificially high sea level pressures", and high temperatures do the opposite. On a cold winter day, Denver's sea-level pressure can come out above its altimeter setting, and on a hot summer day below it.

Same station pressure on topSea levelCold airColder than standard:sea-level pressure comes out higherWarm airWarmer than standard:sea-level pressure comes out lowerSame pressure on topSea levelCold airWarm air
  1. Cold air is denser than standard, so the sea-level pressure comes out higher.
  2. Warm air is lighter than standard, so the sea-level pressure comes out lower.
A cold column gives a higher sea-level pressure; a warm one, lower.

The American Meteorological Society's glossary blames this reduction for many of the oddities in the pressure pattern over mountains on weather maps.

At a high station, watch the trend more than the level. A steady fall in station pressure or the altimeter setting still points to an approaching low. Sea-level pressure there can also fall simply because the air has warmed up. For a home barometer at altitude, the altimeter setting is the steadier number to set it to, as how to read a barometer explains.

Questions people ask

What is sea-level pressure in mb?

The standard value is 1013.25 mb, the same as 1013.25 hPa and 29.92 inHg. Actual sea-level pressure changes with the weather, and the home page shows today's reading for your nearest city in both units.

What is the sea-level pressure at my location today?

The home page shows the latest sea-level pressure from the airport weather station nearest your city. Every city page adds the station's altimeter setting and the actual pressure at the city's elevation.

Is mean sea-level pressure the same as sea-level pressure?

Yes. Both are station pressure reduced to sea level using the temperatures actually observed at the station.

What is the difference between station pressure and sea-level pressure?

Station pressure is the actual pressure where the station is; sea-level pressure is that reading adjusted to sea level. Near sea level they're almost equal. A mile up, they're more than 5 inches of mercury apart.

Why is my barometer lower than the sea-level pressure in the forecast?

Because it shows the actual pressure at your height, about 1 inHg less for every 1,000 feet near sea level. Set it to sea level and it will line up with the forecast.

What is absolute pressure at sea level?

Standard sea-level pressure is 101,325 pascals (1013.25 hPa, 29.92 inHg), the value NIST gives for one standard atmosphere. Actual readings move above and below it with the weather.

How do I convert station pressure to sea-level pressure?

Use the converter above for the altimeter setting, which is sea-level pressure in a standard atmosphere. Official sea-level pressure also needs the station's average temperature over the past 12 hours.

Sources